RideFixerGeneric displays error code
Generic displays error E07: Motor fault
Medium severity Service soon
Can I ride home with this error?
Ride with caution. Pedal without assist only if the wheel turns freely; stop if the motor drags or locks.
What it means
The motor or its wiring is not working correctly. On generic displays the meaning of a code depends on the controller's communication protocol; this meaning is from the display maker's manual for this protocol.
Likely causes
- Loose or bent pins in the motor connector
- Damaged motor cable
- Motor or controller fault
Symptoms
- E07 shows
- No assist, jerky or noisy motor
How to fix it
- With the bike switched off, check the connectors between the display, controller and motor are clean, dry and pushed fully home.
- Look for damaged cable where it leaves the motor axle.
- Do not open the motor.
- If the code stays, take the bike to your dealer or an e-bike repair shop.
How urgent is it?
Needs checking.
Applies to
Did this help?