RideFixerTQ error code
TQ error 5402: ERR 5402 DISP BTN – Remote button pressed when switching on
Low severity When convenient
Can I ride home with this error?
Usually safe to ride. Safe once restarted normally.
What it means
A remote button was held, or is stuck, while the system started.
Likely causes
- Button pressed during start-up
- Button stuck with dirt
Symptoms
- ERR 5402 DISP BTN on the display
How to fix it
- Switch off, then switch on without touching the remote buttons.
- Check the buttons are not stuck with dirt and clean them if needed.
- If the error comes back, contact your TQ dealer.
How urgent is it?
Restart without pressing buttons.
Applies to
- TQ HPR50 with TQ display / remote
Did this help?
More TQ codes
- 4487 ERR 4487 BATT HW – Battery / Range Extender software out of date
- 500A ERR 500A BATT UV – Range Extender voltage too low
- 5401 ERR 5401 DRV CONN – Communication error between drive unit and display
- 5403 ERR 5403 DISP BTN – Remote button pressed when switching on
- 5404 WRN 5404 DISP BTN – Walk assist user error